Stacks Image 3797
Once Christmas was over, one of the most eagerly awaited events of the New Year was the publication of the new Tri-ang Railways catalogue, continuing even today with the present Hornby one. The year of 1963 was no exception. Not only did it contain a wealth of desirable model railway items but as an added surprise, a series of science sets under the name of Tri-ang Lionel Series.

The Science Series comprised of nine individual kits and experiments based on the inventor or discoverer and even included a bust of the person responsible. There are also three distinct series of sets allowing you to discover about a Weather Station, Plastics Engineering, something Rovex knew just a little about and finally, Electronics Engineering. This really is a slightly erroneous description as no inclusion was made of any type of semiconductor device. It was a set from the latter series I received, aged 12, as a Christmas present on the 25th of December 1963.

Being brought up with Tri-ang Railways, we're about the same age, I have always been interested in the operation of model railways or really, playing trains and subsequently the electrical circuitry required to control them. This set was the ideal gift. My interest in making scenery has always been minimal, carried out only as an extreme necessity.
Stacks Image 3800
The set I received that Christmas was a Tri-ang Lionel Electronics Lab Mk. IV. From subsequent records, it cost 126 shillings, £6-6s-0d, six guineas or in metric type money, £6.30. The set was purchased from the Clyde Model Dockyard, 22-23 Argyll Arcade, Glasgow. This shop was a major supplier of most Tri-ang and indeed Meccano related products in Glasgow but alas, it has long been assimilated by the surrounding jewellery, bead and trinket shops.

It would be fair to assume that there would be four types of Electronic Engineering sets in the series but only two, the Mk. II and the Mk. IV were illustrated in the catalogue. In the set instruction book however, listings were given for all four marks, the difference being the number of accessories supplied with each of the sets.

The set consisted of a moulded plastic case with a transparent plastic lid, with all the components for assembly and operation located in three internal boxes covered in yellow tissue paper, with plastic lids and labelled "Laboratory Apparatus". The remaining surface had an array of holes, not unlike a Meccano plate, for mounting most of the accessories. The six volt power supply is derived from four internal 1.5 volt batteries and as they say, batteries not included.

The internal or fixed wiring requires installation by the purchaser. The principal adopted is installation and assembly of a number of devices which then requires connection by fixed wiring to a programming panel. These devices can then be connected together by means of loose wires or jumpers inserted into the holes making contact with a spring tag behind. All assembly is by means of self tapping screws for wire terminations, switch contacts and connecting panel contacts with bolts used for mechanical fixture.
Stacks Image 3803
The instruction book is very comprehensive and takes you through the theoretical aspect of the task followed by the practical operations required. Instruction is also given on the testing of each stage of the assembly as you proceed. A quite ingenious custom tool is included which is a combined screwdriver, spanner and wire stripper, all that is really needed. The control panel has a circular grille opening with a Tri-ang Lionel logo, behind which the electric bell is to be assembled. There are three rotary switches; the first switch is the master off-on switch, then a four way selector switch and the last, a rheostat or variable resistance. Also, there are three lamps, one above each rotary switch but not directly or electrically associated with the switch. The remaining space on this panel is taken up by a 24 point connection or programming panel, marked out as points A-1 to D-6 with two connection holes at each location.

Equipment supplied for self assembly includes an electric bell, a light sensing detector or photocell, a relay with one change over unit, a bimetallic thermometer with variable temperature contact settings, a water detector and an additional, fully enclosed relay where the armature winding operates on the set's six volts but the make contact is rated to switch a domestic mains supply at about five amps. No doubt this sort of device would not be permitted by the draconian Health & Safety zealots of today.

The first listed experiment is proving the set actually works and that you are able to follow the wiring instructions. This means inserting the four batteries, installing two jumpers, turning the master switch on and checking that the bell rings. It does; good start.
Stacks Image 3806
Following on from that the lamps are wired and tested, followed by the wiring of the four way selector switch. The variable resistor is supplied as a piece of flexible insulated material around which is wound a length of resistance wire. This assembly is then flexed and inserted in a moulded slot on the rear of the panel. Terminations are provided in the usual way.

By following the excellent illustrations in the instruction book the relay and photocell are fitted onto the mounting hole array. The thermometer thermostat unit is assembled by mounting the bimetallic coil in the plastic housing along with the pre printed temperature indication label. Calibration is by comparison with another thermometer. That's it; we are now ready to proceed with the experiments.

The experiments consist of making lights work in series and parallel circuits, dimming lights with the rheostat, using the water detector or photocell to operate the relay and subsequently the lights and bell. This experiment is considered the most significant demonstration as many applications in real life depend on relays latching in the on or off position.

Surely the most bizarre experiment in the book is one described as a "Biological Experiment". This requires the voluntary or otherwise assistance of an earthworm. The instructions are that the poor beastie should be kept well wetted and placed on several layers of paper, also well wetted. Electrodes are to be placed at either end, battery voltage applied and the worm's reaction observed. The polarity is then to be reversed. I now quote from the instruction book. "Most worms will tend to stretch when the nose is near the negative end and to double up when the nose is at the positive end. We are not sure of the reason for this". Oh well! I must state that I did not pursue this experiment, not for any particularly ethical reason but earthworms are not that easy to come by three floors up in a Glasgow tenement.

From my personal point of view, I achieved a great deal of enjoyment and knowledge for what now, many years on, seems such a simple outfit. This set instigated a basic knowledge of electricity and low voltage switching principles. This foundation has not been wasted as five years later it pointed to a career with Post Office Telephones who at that time relied on an electromechanical switching system known as Strowger. These Tri-ang Lionel sets were very advanced for their time and must have required much careful thought by their designers to make them so enjoyable for young people to play with and to learn from.